The Comfort radiator cover works by adding a fan to the radiator, which speeds up the flow of air through the radiator. This increases convection and ensures that heat is distributed more efficiently and faster in the room. This allows the radiator to heat more effectively even at lower water temperatures, which is ideal when using a boiler or heat pump. The system helps to save energy without replacing the radiator itself.

The Comfort is suitable from two-plate radiators (T22) onwards. It is important that the fans of the Comfort can rest on the radiator. The distance between two plates should be at least 7cm.

Low temperature heating (LTV) is a heating system that works with relatively low water temperatures, usually between 30 and 55 degrees Celsius. This is considerably lower than traditional heating systems, which often heat water to temperatures of 70 to 90 degrees. Low-temperature heating is mostly used in combination with well-insulated houses and modern heating technologies such as heat pumps or solar boilers.

How does it work?
LTV uses large heat emitting surfaces, such as:
- Special low-temperature radiators: These have a larger surface area or fans to release heat efficiently.
- Underfloor heating: This is the most common application, spreading heat evenly across the floor.
- Wall or ceiling heating: Works in a similar way to underfloor heating.

Because the temperature is lower, heat is spread more evenly, making for a comfortable and energy-efficient indoor environment.

Do you have an LTV heating system and want to increase your radiators' capacity? Then The Comfort is the perfect solution for you. Simply place the radiator cover and fans on top of your existing radiator and enjoy a warmer home, faster. 

Yes, the system is designed for easy installation without the need to replace the radiator. Simply place the units on the existing radiator, then connect the units together if necessary. Next, place the magnetic sensor on the side of the radiator’s supply (the side with the knob) and connect the system to power. Once the Sentimo Comfort is connected to the power supply, the fans will run briefly, after which they will only operate when the radiator is on.

The fans may make some noise, but the system is designed to operate as quietly as possible.

Noise at 1 metre in length: 24dB(A)

Noise at 3 metres in length: 32dB(A)

No, the system is specifically designed to improve the performance of radiators, not underfloor heating.

With improved convection and more efficient heat transfer, you can save a significant amount of energy, especially at lower water temperatures or when using a heat pump.

The radiator itself will not necessarily feel warmer, but the airflow is accelerated as it does, bringing the room up to temperature a lot faster.

The cable is 1.20m long.

The Original radiator cover, like the Comfort, provides optimal heat distribution. The Original performs just as well and is guaranteed not to affect heat output. But are you looking for a bit more comfort and faster warmth in your home, or do you have an older house with poor insulation? Or perhaps you're using Low Temperature Heating (LTV), such as a heat pump? In that case, the Comfort is a great choice. This is because the fans help distribute the heat more evenly throughout the room.